The Jarvis Model VC - pneumatically powered vent removal tool for
all types of poultry.
•Ideal tool for high precision and extremely economical poultry
vent removal, for any type or size of bird.
•Labor reduction - high speed and efficient vent and rosebud gland
removal allow a reduction in line personnel.
•Increased yield - cut size is controlled by the vent gun, not the operator.
•Reduced contamination - fecal material is sucked away as the Model
VC removes vents.
•Low maintenance, high reliability - a weekly greasing is all that’s
required.
•Low cost - the Model VC is economically priced with hardened surgical
stainless blades for outstanding durability.
•Free, on-site service - an unparalleled benefit only from Jarvis.
•Meets national and international requirements for safety and hygiene.
Model
VC |
||
Specifications: | ||
Drive | Pneumatic |
|
Operating Pressure | 30
- 60 psi |
2.0
- 4.1 bar |
Air Consumption | 5.6
-14
ft³ / min |
0.16
- 0.39 m³ / min |
Vacuum Requirements (min) | 15
in Hg |
50.8
kpa |
Free Air Flow (for vacuum) | 6
- 7 ft³ / min |
0.16
- 0.19 m³ / min |
Capacity |
Limited
by operator skill (avg.3000/hr) |
|
Control Handle | Single
Trigger |
|
Blade
Diameter (range) |
0.75
- 1.75 in |
19
- 44 mm |
Blade
Length (range) |
0.88
- 3.50 in |
22
- 89 mm |
Overall
Length |
11
in |
279
mm |
Weight |
3.2
lbs |
1.45
kg |
|
|||||||||||||||||